Material Hoist_Material Handling

You Are Here: Home Material Hoist_Material Handling

Very sturdy and user friendly.
Low maintenance and easy to install.
Available with Electric motor or Diesel engine.
Inbuilt mechanical locking system for bucket and platform (in case of wire failure) which will lock the platform and bucket with the tower mast and restrict the free fall.
Optional Dual drives (Electrical and Diesel prime mover is installed on the same chassis. Power can be taken from any source and is easily interchangeable),Optional Calibrated Water Tank and Optional Electronic Weighing System is available.

A fail safe brake is incorporated in the Motor itself to provide double protection against free falling in case of power failure.
Optional - Speed control via the use of VFD to save time and maximize the output. Highly recommended for the height of 70 Mtr and above.
Optional - Multi floor selection is available via use of Encoder Technology and customized Control Panel for higher productivity, lower operator fatigue and added convenience. Highly recommended for the height of 70 Mtr and above.
Optional - Dual bucket system to double the output.

Technical Data	TH 0.5 TON	TH 1.0 TON	TH 1.5 TON	TH(BM) - 1.0 TON	TH(BM) - 1.5 TON
Maximum Lifting Height	Up to 50 Meters	Up to 75 Meters	Up to 75 Meters	Up to 200 meters	Up to 200 meters
Maximum Pay Load	500 kg	800 kg	1200 kg	800 kg	1200 kg
Wire Rope Size	10 mm	12 mm	14 mm	12 mm	14 mm
Drive Power (Electrical Motor)	10 HP	12.5 HP	15 HP	10 HP Brake Motor	12.5 HP Brake Motor
Drive Power (Diesel Engine)	10 HP	12 HP	16 HP	N/A	N/A
Lifting Speed	30 m/min	30 m/min	30 m/min	30 m/min	30 m/min
Speed With VFD	N/A	N/A	N/A	0 - 40 m/min	0 - 40 m/min
Tower Structure	Front Angle 65 x 6 mm. Back Angle 65 x 6 mm.	Front Angle 65 x 6 mm. Back Angle 65 x 6 mm.	Front Angle 65 x 8 mm. Back Angle 65 x 8 mm.	Front Angle 65 x 6 mm. Back Angle 65 x 6 mm	Front Angle 65 x 8 mm. Back Angle 65 x 8 mm.
Floor Selection	N/A	N/A	N/A	Optional	Optional